User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Log Server
TetraFlex® 7.5 Manual 2-100
with other LogServer settings
as well.
LogServerNo
Int
25
Log server number
AutoDetectLocalIps
Int
1
This setting enables or
disables automatic detection
of which network interface is
LAN and WAN.
The LogServer needs to know
which network interface is the
“LAN” when joining multicast
groups. It auto-detects this in
the following way: 1
st
if a NIC
is named “LAN” use this. 2
nd
if
no “LAN” NIC found, use the
logical interface which has an
IP starting with the default
LAN segment: 172.16.x.y
3
rd
if none of the above
criteria is met, the use the first
interface found. NIC=Network
Interface Card
LanIp
String
0.0.0.0
This is only used when
AutoDetectLocalIps=0.T
he LogServer will join its
multicast groups via the
network interface with this IP.
It is only needed to specify
this value in case of two or
more network adapters.
It is the IP towards the Tetra
nodes that needs to be
specified here.
WanIp
String
0.0.0.0
This is only displayed as info.
CtrlMulticastIp
String
224.239.16.1
This is the multicast IP
address of the multicast group
where the control messages
flow.
CtrlMulticastPort
Int
42402
This is the multicast port
number for Ctrl data.
LogSrvMulticastIp
String
224.239.17.1
This is the multicast IP
address of the multicast group
LogSrvMulticastPort
Int
42402
This is the multicast port
number
VoiceMulticastPort
Int
42396
This is the multicast port
number for Voice.
CallInfoLogEnabled
Int
1
This setting can
enable/disable CDR- and MS
Registration logging. This
setting only has effect when
using a License dongle where
Call Info Logging is allowed.