User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Log Server
TetraFlex® 7.5 Manual 2-101
SdsLogEnabled
Int
1
This setting can
enable/disable SDS logging.
This setting only has effect
when using a License dongle
where SDS logging is
allowed.
VoiceLoggingCh
Int
8
This setting defines how
many concurrent calls can be
voice logged. This setting only
has effect when using a
License dongle where voice
logging is allowed.
LogAllMsByDefault
Int
1
This setting allows logging of
non-configured MS in the
LogServer when enabled. If a
MS has been configured in
the LogServer, it will use
these values regardless of
this setting.
When this setting is disabled,
the MS must be configured to
be logged by the LogServer.
First time the TetraFlex
®
Log Server is launched, it will automatically generate the
LogServer.ini file with the default parameters in the table above. In most cases, it will only be
necessary to change the “LocalIp” if the TetraFlex
®
Log Workstation or Log Server machine
has more than one network interface card.
2.10.4 Installation
2.10.4.1 Internal Log Server:
The Log Server is preinstalled on all 8GB CF cards (delivered with all SB421 today).
NOTE: The Log Server needs to have 1GB RAM to function properly (delivered with all
SB421 today).
The log server is as default stopped from factory and need to be started when applicable.
This can be done from the Start menu – TetraFlex – LogServer- LogServer Restart. This only
works if the log server has been started once before.
If the Logserver never has been started you must use the install function from: Start menu –
TetraFlex – LogServer- LogServer Install.
This will start the MySQL service, Log server application and the log server tray. This also will
create a new empty database if not already created.