User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Log Server
TetraFlex® 7.5 Manual 2-102
2.10.4.2 External Log Workstation and Log Server
The external Log Workstation and Log Server are pre-installed and preconfigured from
DAMM at delivery.
If for any reason it has to be reinstalled this procedure must be followed:
This description is based on a Windows 7 platform installation, but it also applies to Windows
Server 2008 platforms.
The installation procedure has been tested on a Dell Precision T3500 and on a Dell
PowerEdge R710 that are the hardware used for the Log Workstation and the Log Server
delivered from DAMM.
To install the Log Server, you have to follow these steps:
---------------------------------------------------------
1. Rename NIC's to "LAN" and "WAN"
2. Disable "Automatic updates"
3. Change "Power Options" to high performance
4. Install "MySql ODBC 3.51 Driver" or later version
5. Install "MySql Community Server"
6. Install the MySQL GUI Tools
7. Create Tetra user
8. Copy Tetra apps
9. Install the Log Server
10. Add rule for firewall
1. Rename NIC's to "LAN" and "WAN"
Go to "Control Panel\Network and Internet\Network Connections"
Select the "LAN" Network interface card which should be the internal NIC on a
Workstation. Look for the white "LAN" label on machine by the network card plug to
identify it. Right click and select "Rename" from menu, name it "LAN".