User's Manual

Doc. No.

Rev.

Date

DRAFT

1.01

2012-01-27

Damm Cellular Systems A/S, Denmark

TetraFlex

7.5 Manual - Log Server

TetraFlex® 7.5

Manual

2-106

This causes a delay of approx 2 minutes after power on before startup of the service. This is

necessary because the dongle might not be ready when Log Server Service is started (only

seen on machines with SSD disks and very short reboot times).

Executing the "LogServer Restart" will copy and generate the necessary LogClient install

files.

Finally set the Notification level on the LogServerTray: right click on "Start" and select

"Properties".

In the "Taskbar and Start Menu Properties" dialog go to tab "Taskbar" and select

"Customize...".

In the Icon list change behavior for "Log Server Tray Application" to "Show icon and

notifications".

10. Add rule for firewall

Go to "Control Panel\System and Security\Allow a program through Windows Firewall"

Select "Allow another program".

Browse to C:\Tetra\Applications\LogServer\LogServer.exe

Allow this for both Home (Private) and Public Network.

Allow also for LogClient.exe and MySql.exe.

2.10.4.3 Log Client:

The log client can be started either from the log server or an external PC. Before you can use

the log client from an external PC it must be installed on this PC using this procedure:

Use a Explorer to connect to the "TetraFlex" share on the LogServer, right click the

"\\<LogServer>\TetraFlex\LogClient\LogClientInstall.vbs" and select "Run as administrator"

and follow the instructions on the screen.

A log Client link icon will appear on the desktop.

The Log Client may be started using any valid DAMM dongle for statistics display only.

2.10.4.4 Log Client installation on a PC with Windows 7:

If you can’t find the node from where the dispatcher shall be installed, this setting in Windows

7 can help:

 click the start button and type secpol.msc in the search function.

 Browse to "Local Policies" -> "Security Options". Now look for the entry "Network

Security: LAN Manager authentication level" and open it. Click on the dropdown

menu and select "Send LM & NTLM - use NTLMv2 session security if negotiated".

Apply the settings.