User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Packet Data Gateway
TetraFlex® 7.5 Manual 2-117
 The IP Address Segment must be set from the Config dialog.
 From the Network Management configure a packet Node attachment (if not already
done via TetraOM). This is done from setup in the subscriber register in the
different profiles where PD-GW access is desired (PD GW must be active). In the
dialog below PD GW 1 node is checked and Node 1 is attached for profile 0 (e.g.
node name BSC_BUK).