User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - TetraOM
TetraFlex® 7.5 Manual 2-137
Figure 2-41: OM Connection
The connection list may be empty. To connect to the TR or BSC, a new entry in the list may
be created by selecting New and afterwards double-click on the entry.
It is recommended to name the connection into some well defined name.
As an example this syntax might be used:
“System Number”-“Site Number”-“Unit Description”-“Organization”
E.g. TF24-S004-BSC1-Support
To make a new connection push the “New” button and select the connection type (normal
Network) and fill out the entry name and IP address of the unit (Send A411+ set to No).
The units can then be accessed with OM by clicking on the list and push Connect.
Manual connect is possible as well, selecting the Manual Connect button and manually
entering the connection parameters.