User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - TetraOM
TetraFlex® 7.5 Manual 2-141
Figure 2-46: OM syntax
When the yellow spaces are filled out and the Execute button is selected (or the enter key is
pressed), the command is send to the unit.
The TetraOM will return to the terminal window, and the command response is shown.
Don’t forget to save (70/SAVE or F70/SAVE for the BSC)
2.14.3.6 TetraOM Editor
The TetraOM program also contains an Editor, where command files may be edited. When
the editor is active, commands from the help system are put into the Editor instead.
Command files can be sent from the Editor. Command files can also be executed directly
from the disk.
Note that the system configuration files (Cnfgxxx.txt) on the BSC is ASCII files in a TetraOM
compatible format, which can be edited directly in the TetraOM Editor. However they are
normally created and updated automatically from the system.