User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - TR Remote desktop communication
(VNC)
TetraFlex® 7.5 Manual 2-148
2.15 TR REMOTE DESKTOP COMMUNICATION (VNC)
2.15.1 VNC setup
An alternative way to communicate with the Base Station is to use the VNC program.
The TR is as a standard provided with a VNC Server to allow one user at a time to establish
a remote desktop session with the TR.
To establish a remote session, start VNC on the Windows computer. (If it does not connect
please check the VNC connection options “Format and encoding” change to “Raw”) You will
get the following window:
Figure 2-47: VNC picture
By pressing the LED, the LED window will close and give access to the “MY device” icon (or
just move the active windows until my device icon is shown)
Figure 2-48: VNC My Device