User's Manual

Doc. No.
Rev.
Date
1.00
2011-12-08
Damm Cellular Systems A/S, Denmark
TETRAFLEX
®
V7.5 MANUAL - Network Management
TetraFlex® 7.5 Manual 3-42
o Call Priority
The call priority for all mobiles belonging to this profile
May be selected for 1 to 14 or set to mobile controlled (mobile programmed
priority is in use)
01 is the lowest priority and 14 is the highest (priority 15 - pre-emptive can be programmed in
the radios and are used for alarms). Pre-emptive priority means that it will take over a
timeslot that already is used in case of all timeslots are used.
Timers – Timers are mainly used to restrict unwanted time consuming use of timeslots
o Individual PTT timeout
Disabled or selectable from 1 to 25 minutes
o Group Timeout
Time from last PTT is released to group call shut down.
Selectable from 0 to 20 seconds
0 sec. is valid, but use with care as this could increase load on the MCCH
o Max Call Duration
Maximum duration of the call before shut down
Infinite or Selectable from 1 to 250 minutes
o Max PTT duration
Maximum time of the PTT
Mobile controlled or selectable from 2 to 250 seconds
o Late entry timer