Setup Guide

Doc. No.
Rev.
Date
1.11 2020-03-06
Damm Cellular Systems A/S, Denmark
BS422 Installation and Setup guideline
BS422 Installation and setup guideline - Specifications subject to change without notice 2
INTRODUCTION
This manual is intended for installation and configuration of the BS422 for operational use.
It is recommended that engineers doing the installation and configuration of a BS422 have
practical experience in installation of radio and computer systems, and have made
themselves familiar with the BS422 equipment through appropriate DAMM training courses
and study of the content of the TetraFlex manual and other documentation from DAMM.
IMPORTANT:
Updates / changes / important information related to the TetraFlex® system and software
may be downloaded from the protected part of www.damm.dk
Please check this URL for updated information before attempting to install or correct errors
NOTE: Chapters marked with a indicate areas where special care must be taken to
avoid personal injury or damage to the equipment.
Before starting installation and configuration, please read the entire
manual carefully.
NOTE: It is the responsibility of the system owner / operator to ensure
that only authorized service persons has access to the inside circuits
of the BS422
NOTE: It is the responsibility of the system owner / operator to ensure
that all local legislation, rules and regulations are complied.
Internal fuses protect the BS422. Always replace with fuses of
equivalent value and type.
General Warning
This manual contains important safety and operational information. Please read and follow
the instructions in this manual. Failure to do so could be hazardous and result in damage to
your device.
Changes and modifications to this device not expressly proved by DAMM could void the
user’s authorization to operate this device