Product Sheet

D10522XXX-REF
Rev. 1.0_2022.08.12
Page 4 of 7
Computer module Value
Operating system Windows 10 IoT Enterprise
Ethernet LAN/WAN (voice over IP) 10/100Mbit/s
Synchronization source Value
1 PPS source GNSS
Precision Time Protocol (PTP) IEEE1588
Antenna conguration Value
Minimum antenna setup, no diversity One combined TX/RX
Minimum antenna setup, dual diversity One TX/RX A, one RX B
Antenna setup with two BS422-S/BS422-SP, dual diversity Two combined RX/TX antennas
GPS antenna Passive or active (+5VDC)
Connectors Value
RX connectors RX A and RX B N female
TX connector N female
GPS antenna connector N female
LTE antenna BNC Connector
Combined power, WAN/LAN and sync connector Sub D-25 male
DC power input Screw terminal 3 x 4mm
2
; +, PE, -
AC power input in BS422-SP only Screw terminal 3 x 4mm
2
; L, PE, N
DC power output in BS422-SP only Screw terminal 3 x 4mm
2
; +, PE, -
DC power input/output (optional) in BS422-SP Screw terminal 3 x 4mm
2
; +, PE, -
DC power supply (BS422-S and BS422-SP) Value
Power source -44VDC to -60VDC
-48VDC SELV (nominal)
Power-over-Ethernet
2
8-wire PoE (4 WAN + 4 LAN)
Power consumption, idle mode 20W typ.
Power consumption, active mode (diff. modes, see separate
table)
Max. 200W
Power Supply (BS422-SP only) Value
AC supply 90–264VAC
AC input frequency 47–63Hz
Power factor Min. 0.95, typ. 0.99
Max. fuse before PS 10A T
DC in -48VDC SELV
External battery IN/OUT -48VDC SELV
2
PoE max. power is 90W where output power will be limited accordingly
Specications