Use and Care Manual

-4-
IMPORTANT
Place dehumidier in the upright position. When transporting a
dehumidier to site, allow the dehumidier to stand upright for
30 minutes before switching ON. This is necessary to allow the
refrigerant system to stabilize and avoid system damage.
SETTING UP THE DEHUMIDIFIER:
Operate the dehumidier in an enclosed area as this creates a drying
chamber. Close all doors, windows and areas that open to external areas
to maximize the dehumidier’s water removal efciency. Keep trafc
through the drying chamber to a minimum. Place the dehumidier in the
center of the room, away from walls and furnishings. DO NOT allow the
airow to be obstructed.
Illustration of correct positioning for best performance.
SETUP INSTRUCTIONS