MSDS

02/03/2014Revision:
02/06/2014Printed:
2
Damp Rid Moisture Absorbers
MATERIAL SAFETY DATA SHEET
01/27/2014Supercedes Revision:
Page:
3. HAZARDS IDENTIFICATION
Emergency Overview
Odorless, white pellets or flakes. Causes eye irritation. Avoid breathing dust, Avoid contact with eyes, skin and
clothing. Keep container tightly closed. Wash thoroughly after handling. Reacts with water to liberate heat.
Potential Health Effects (Acute and Chronic)
ACUTE INHALATION, SKIN CONTACT, EYE CONTACT: May cause irritation.
INGESTION: May cause nausea.
CHRONIC EFFECTS: None known.
Target Organs: Stomach, Upper Respiratory Tract
Primary Routes of Entry: Ingestion, Inhalation
Signs and Symptoms Of Exposure
See Potential Health Effects.
Medical Conditions Generally Aggravated By Exposure
None known.
OSHA Regulatory Status:
This material is classified as hazardous under OSHA regulations.
4. FIRST AID MEASURES
Emergency and First Aid Procedures
INHALATION: Remove from exposure area to fresh air.
SKIN CONTACT: Remove contaminated clothing and shoes. Wash affected area with soap or mild detergent.
Seek medical attention if irritation persists.
EYE CONTACT: Flush eyes with large amounts of water for at least 15 minutes. Get medical attention.
INGESTION: Get medical attention.
Note to Physician
None.
5. FIRE FIGHTING MEASURES
Not flammable or combustible.
Flammability Classification:
No data.
Flash Pt:
LEL: No data. UEL: No data.
Explosive Limits:
No data available.
Autoignition Pt:
Fire Fighting Instructions
Neglibile fire hazard when exposed to heat or flame. Apply cooling water to sides of containers that are exposed
to flames until well after fire is out. Extinguish fire using agent suitable for type of surrounding fire and/or
chemicals. Do not sure water directly on the material. Avoid breathing corrosive vapors; keep upwind. Dike
area to prevent runoff and contamination of water sources.
Flammable Properties and Hazards
Negligible fire hazard when exposed to heat or flame.
Hazardous Combustion Products
Not applicable.
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
ANSI Z400.1 format