MSDS

02/03/2014Revision:
02/06/2014Printed:
3
Damp Rid Moisture Absorbers
MATERIAL SAFETY DATA SHEET
01/27/2014Supercedes Revision:
Page:
Extinguishing Media
Non-combustible liquid - use extinguishing media for underlying cause of fire.
Unsuitable Extinguishing Media
None known.
6. ACCIDENTAL RELEASE MEASURES
Steps To Be Taken In Case Material Is Released Or Spilled
Wear appropriate protective gear for the situation. Prevent skin and eye contact.
For dry spills, place material in covered, clean dry container for disposal.
7. HANDLING AND STORAGE
Precautions To Be Taken in Handling
Observe all federal, state and local regulations when storing this product.
Precautions To Be Taken in Storing
Keep in clean tightly closed dry containers. Store away from incompatible materials.
Other Precautions
None.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Equipment (Specify Type)
Use of a NIOSH approved respirator should be based on contamination levels in the workplace or situation.
When warranted, use a face mask particulate respirator with a NIOSH N95 rating.
Eye Protection
Wear safety glasses with splash shields or safety goggles/shield.
Protective Gloves
Wear appropriate protective gloves to prevent skin contact.
Other Protective Clothing
Wear appropriate protective (impervious) clothing and equipment.
Engineering Controls (Ventilation etc.)
Provide local exhaust ventilation.
Work/Hygienic/Maintenance Practices
A source of clean water should be available in the work area for flushing of the eyes and skin.
Wash hands thoroughly after use.
Do not eat, drink, or smoke in the work area.
Before reuse, thoroughly clean any clothing or protective equipment that has been contaminated by prior use.
Discard any clothing or other protective equipment that cannot be decontaminated, such as gloves or shoes.
9. PHYSICAL AND CHEMICAL PROPERTIES
[ ] Gas [ ] Liquid [ X ] Solid
Physical States:
370 F
Melting Point:
No data.
Boiling Point:
No data.
Autoignition Pt:
No data.
Flash Pt:
2.15 at 77 F
Specific Gravity (Water = 1):
15.4 LB/GL at 22 C
Density:
No data.
Vapor Pressure (vs. Air or mm Hg):
No data.
Vapor Density (vs. Air = 1):
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
ANSI Z400.1 format