SDS

04/14/2015Revision:
04/14/2015Printed:
Page: 3
Damp Rid Moisture Absorbers
SAFETY DATA SHEET
03/26/2015Supersedes Revision:
5. FIRE FIGHTING MEASURES
Flash Pt:
No data.
Neglibile fire hazard when exposed to heat or flame. Apply cooling water to sides of
containers that are exposed to flames until well after fire is out. Extinguish fire using
agent suitable for type of surrounding fire and/or chemicals. Do not sure water directly
on the material. Avoid breathing corrosive vapors; keep upwind. Dike area to prevent
runoff and contamination of water sources.
Fire Fighting Instructions:
Negligible fire hazard when exposed to heat or flame.
Flammable Properties and
Hazards:
Autoignition Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Flammability Classification:
Not flammable or combustible.
Non-combustible liquid - use extinguishing media for underlying cause of fire.
Suitable Extinguishing Media:
None known.
Unsuitable Extinguishing
Media:
6. ACCIDENTAL RELEASE MEASURES
Wear appropriate protective gear for the situation. Prevent skin and eye contact.
For dry spills, place material in covered, clean dry container for disposal.
Steps To Be Taken In Case
Material Is Released Or
Spilled:
7. HANDLING AND STORAGE
Observe all federal, state and local regulations when storing this product.
Precautions To Be Taken in
Handling:
Keep in clean tightly closed dry containers. Store away from incompatible materials.
Precautions To Be Taken in
Storing:
None.
Other Precautions:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
OSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits
No data. No data.
10043-52-4 Calcium chloride
No data.
No data. No data.
7647-14-5 Sodium chloride
No data.
No data. No data.
7447-40-7 Potassium chloride
No data.
Use of a NIOSH approved respirator should be based on contamination levels in the
workplace or situation. When warranted, use a face mask particulate respirator with a
NIOSH N95 rating.
Respiratory Equipment
(Specify Type):
Wear safety glasses with splash shields or safety goggles/shield.
Eye Protection:
Wear appropriate protective gloves to prevent skin contact.
Protective Gloves:
Wear appropriate protective (impervious) clothing and equipment.
Other Protective Clothing:
Provide local exhaust ventilation.
Engineering Controls
(Ventilation etc.):
A source of clean water should be available in the work area for flushing of the eyes and
skin.
Wash hands thoroughly after use.
Do not eat, drink, or smoke in the work area.
Before reuse, thoroughly clean any clothing or protective equipment that has been
contaminated by prior use. Discard any clothing or other protective equipment that
Work/Hygienic/Maintenance
Practices:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format