User guide

Dugan Model E-3 User Guide Dugan Control Panel
45
Mix Bus Matrix
Click the mix bus button to open the mix bus matrix screen (see Figure 5-13). In eight-
channel mode, an internal mix matrix can route processed or unprocessed inputs to
six mix bus outputs (aux out 1–6) on the
AES/EBU AUX I/O connector.
Figure 5-13 Mix bus matrix screen in Dugan Control Panel
The default mix bus assignment routes automix 1–8 to aux out 1. You can re-establish
the default routing by clicking the set to defaults button (at top-left).
Scroll horizontally to see all available processed and unprocessed signals.
A blank cell means no connection. A cell with 0.0 means unity gain.
To assign your own routings, enter values (-96 to +31.5 dB) in the desired mix bus
matrix cells.
A master fader trims the gain of each mix bus output. Gain values may also be en-
tered numerically below the fader. You can Ctrl-click the fader to reset its value to 0.
Touch and hold the weight slider to reset its value to 0.
The level meter shows the resulting output level.
You can mute the output and reverse the signal’s polarity.
iPad