User manual

Page 26
17. Add the Danalock in the HomeKit App
When the Danalock has been mounted on the door it is
ready to be set up with the Home app. Instructions on how
to use the Home app can be found at:
https://support.apple.com/en-us/HT204893
The HomeKit setup code
can be found both inside the
battery compartment and
on the ”Simple Guidelines”
leaet.
18. Calibrate the lock
The Danalock needs to be
calibrated in order to function
properly. Calibration can be
done either automatically or
manually with the commands
found on page 29.
The Danalock can be
congured further with the
commands found on page
29 and 30.