22/11/2022 Danalock V3 – Basic app guide Visit our website for more information about Danalock products and product guides www.danalock.
The Danalock app The Danalock app is used as main control for all Danalock products*. Go to App Store or Google Play to download the app. App Store Google Play https://itunes.apple.com/dk/app/danalock/id768685462 https://play.google.com/store/apps/details?id=dk.polycontrol.ekey *The Danalock V3 HomeKit smart lock and its features is controlled by Apple’s HomeKit app.
Contents Create a user 4 The keychain 5 Add a Danalock V3 to your keychain 6 Calibrate your lock 7 Invite a guest 10 Manage guests 14 User and lock information 17 Firmware upgrade 19 Delete 20 Reset settings 21
Page 4 | Danalock app user guide Create a user When you open the app for the first time, you will be asked to either log in or sign up.
Page 5 | Danalock app user guide The keychain The keychain is where you find the locks you have access to. If you have more than one device added to your account you’ll be able to select by swiping left and right. Use the lock buttons to lock (red button) or unlock (green button) the device. To start using the Danalock App you need to add at least one Danalock device to your keychain.
Page 6 | Danalock app user guide Add a Danalock V3 to your keychain To add a Danalock V3 to your keychain press ADD NEW DEVICE. Your phone now scans the area for available devices and presents a list for you to choose from. The icons indicate the type of device found: 3 Danalock V3 3 Universal Module V3 Universal Module V2 Press the device you want to install. The app will connect and add the Danalock device to your keychain.
Page 7 | Danalock app user guide Calibrate your lock If the device you have added is a Danalock V3, you need to calibrate it. You can calibrate it either manually or automatically. Navigate to the keychain and make sure that the lock you want to calibrate is selected in the keychain. Press DEVICE and select CALIBRATION in the settings list. Choose between MANUAL CALIBRATION and AUTOMATIC CALIBRATION.
Page 8 | Danalock app user guide Calibrate your lock Automatic calibration Make sure that the Danalock V3 is mounted correctly. Leave the door open and lift the handle if necessary. Turn your Danalock V3 to unlocked position and press the calibration button. The Danalock V3 will light up white while calibrating. When the calibration has been completed your lock is ready to use. In the settings tab you can see a list of configurations of other features for your Danalock V3.
Page 9 | Danalock app user guide Calibrate your lock Manual calibration Turn the Danalock V3 to unlocked position and press the green button. Then turn the Danalock V3 to locked position and press the red button. You can press the blue button to test your calibration. When the calibration has been completed your lock is ready to use. In the settings tab you can see a list of configurations of other features for your Danalock V3.
Page 10 | Danalock app user guide Invite a guest If you have more than one Danalock V3 in the keychain navigate to the Danalock V3 you want to invite to, and press USERS. Press INVITE in the upper right corner to go to the invitation screen.
Page 11 | Danalock app user guide Invite a guest Select access level Select the type of access you want your guest to have: Temporary guests: Temporary guests are given access in a single time interval. With this access type, you define the interval in which you want your guest to have access. Permanent guests: Permanent guests have access at all times, but can’t invite new guests themselves.
Page 12 | Danalock app user guide Invite a guest Set guest settings Below the access level and time restrictions, you can turn on usage notifications if you want to be notified when the user operates the lock.
Page 13 | Danalock app user guide Invite a guest Send invitation You can invite your guests in three different ways: Invite by sharing a link This will generate a hyperlink that you can share with the guest. Note that the link can only be activated once and can thus only be used to invite one guest. Invite by email Enter the email of the guest you want to invite. The Danalock App will take you directly to your preferred mail application and generate the invitation. Send the mail to invite your guest.
Page 14 | Danalock app user guide Manage guests You can easily monitor and manage the guests for your Danalock devices. Navigate to the Danalock device you want to manage in the keychain and press USERS in the bottom navigation bar. Here you can see the guest list for your Danalock device along with additional details about each guest. Guest information On the list you can see each of your guests along with a set of icons. Each icon gives information about what kind of access the guest has.
Page 15 | Danalock app user guide Manage guests Change guest access To change the access settings for one of your guests, tap the guest on the list, make the desired changes and press SAVE.
Page 16 | Danalock app user guide Manage guests Remove guest To remove one of your guests from your guest list, tap the guest on the list, make the desired changes and press save.
Page 17 | Danalock app user guide User and lock information You can see a list of your guests’ email addresses as well as their chosen displayed names by pressing USERS in the bottom navigation bar. Guest profiles You can see a list of your guests’ email addresses as well as their chosen displayed names. Navigate to the Danalock device you want to manage in the keychain and press USERS.
Page 18 | Danalock app user guide User and lock information Lock information Navigate to the Danalock device you want information about in the keychain and press DEVICE. Here you can change the Lock name and see battery status. Press DEVICE INFO to see specific information such as MAC address and product type.
Page 19 | Danalock app user guide Firmware upgrade Navigate to the Danalock device you want to update in the keychain. Go to device settings, press LOCK INFO > FIRMWARE. The Danalock App checks installed firmware and updates it if there is a newer one available. It is important you keep your phone near the Danalock V3 at all times during the firmware update. Before updating the firmware make sure the phone is at a sufficient power level.
Page 20 | Danalock app user guide Delete Navigate to the Danalock device you want to remove in the keychain. In the SETTINGS list of your Danalock V3 press DELETE DEVICE. The Danalock App will remove the lock from your account. To delete an accessory device from your account start by unpairing it from your Danalock device. In the accessory device settings list press PAIRING > UNPAIR DEVICE. When the accessory device has been unpaired press DELETE in the SETTINGS list.
Page 21 | Danalock app user guide Reset settings To reset the Danalock V3 settings you insert a small pin or paper clip into the hole on the side of the Danalock V3 and press ten times. When the reset request is confirmed the LED will blink red.
Visit our website for more information about Danalock products and product guides www.danalock.
