Technical Manual

V3-BTZBEE
Danalock V3-BTZBE, Technical Manual v.2.3, February 2019 Page 7
Qualified Service
Except for batteries, the V3-BTZBE contains no user serviceable or replaceable parts.
Non-functioning units must be returned to an authorized service center for repair or
replacement.
Accessories and Batteries
Use only approved accessories or batteries. Do not connect incompatible products.
There is risk of explosion or fire if an incorrect type replacement battery contacts are
shorted. Do not exceed the temperature ranges or other environmental conditions
specified by the battery manufacturer. Dispose of used batteries according to the
instructions provided with the batteries.
Electro mechanical lock classification
The following statements are related to the European norm EN 14846 for building
hardware – electromechanically operated locks and striking plates. The V3-BTZBE is
classified according to this standard with the below declarations and precautions.
Category of use
The V3-BTZBE can be used in areas with medium frequency of use by people with some
incentive to exercise care but where there is some chance of misuse, e.g. internal office
doors or internal residential doors. EN 14846 category of use classification grade=0.
Durability, door mass and closing force and security (Physical attack)
The type of door i.e. mass and closing force, durability for dead bolt or latch bolt
operations and security for physical attacks are not applicable to V3-BTZBE. The V3-
BTZBE lock is not in any case related to the door or striking plate already existing on the
door where V3-BTZBE is mounted. It is however recommended to verify the operation of
the V3-BTZBE after mounting the product. Poly-Control ApS is not liable for the
classification of the door and striking plate in relation to the mounting of the V3-BTZBE. EN
14846 classifications N/A are used.
Fire doors
The V3-BTZBE series is not approved for use with fire doors. EN 14846 suitability for use
on fire/smoke doors classification grade=0.
Safety
No requirements are defined in the EN 14846 classification scheme.
Water-Resistance
The V3-BTZBE series is not water-resistant. The lock must therefore be installed on the
inside of the door where it is dry and not subjected to either water streams or submersion.
EN 14846 corrosion resistance classification grade=0.
Security for electrical functions
The V3-BTZBE has no indications, sound alarms in case of a lock malfunction. EN 14846
security – electrical function classification grade=0.