Safety Precautions The following safety precautions nest be taken when installing and using your air conditioner. 1 The air conditioner must be plugged into jts own specific power source, which must be installed in compliance with national wiring. earthing and safety regulations. Depending on nations regulations and your specific installation, you may need to install: * A circuit breaker For further information on electrical requirements, contact a professional electrician.
Contents PREPARING YOUR AIR CONDITIONER Safety Precautions Description of Each Component Remote Control Buttons Getting Started Inserting the Remote Control Batteries ND gen OPERATING YOUR AIR CONDITIONER Cooling Your Room Airing Your Room Removing Excess Humidity .. Adjusting the Air Flow Direction Horizontally .
Description of Each Component The design and shape are subject to change. Air outer Outer air flow biased Ee Down orientate ostentation} Inner air flow . blades (right/left Air outlet orientation) Ventilation lover Air inlet {Inside} Alr inlet (Outside) Air filter (Inside) Power plug (The type of power plug may differ, depending on ihe local power supply.
Remote Control Buttons Timer setting BURN ws Timer 3 A 31 Temp.
Getting Started Your Owner's Instructions contain much valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit's features, The booklet is organized as follows. + The following figures are shown on pages 4 and 5: = Description of Each Component « Re mate control (buttons) They will help you find the buttons and understand the symbols displayed.
Inserting the Remote Control Batteries You must insert or replace the remote control batteries whee : 4 You purchase the air conditioner * The remote control does riot work correctly 3 + Use two AAA, LR OZ 1.5V batteries. + Do not use old batteries or different kinds of batteries together. + Batteries may be completely discharged after 12 months, even if they have not actually been used. 1 Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it.
Cooling Your Room You must select the Cool mode if you wish fo lower the temperature in your room. You can also set the Fan speed. Remote Control Control Panel 3 Press the (ono bunion. DE Result: *The air conditioner starts up in the Cool mode. Power The unit beeps twice. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: *Plugged in # Stopped It will start up normally after three minutes.
Airing Your Room If you want to provide air circulation without cooling, you can use the Fan mode. 1 1 necessary, press the (0 (On/Off) button. Result: + The air conditioner starts up in the Cool mode. + The unit beeps twice. 2 [the fan speedup, not displayed on the contra! panel: + Press the button on the remote control or # Press the bunion on the unit one or more times until the fan speed {F1, displayed.
Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. Remote Control Control Pane! 1 I necessary, press the ( (On/Off) button. Power Result: + The air conditioner starts up in the Col mode, + The unit beeps.
Adjusting the Air Flow Direction Horizontally Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the unit. Adjust the air flow blades to the desired position by pushing them side lo side. Adjusting the Air Flow Direction Vertically The outer air flow blades can be adjusted to control the vertical air flow direction. RECOMMENDATION When... 7 Adjust the blades to face.
Setting the On Timer Remote Control Control Panel Power The On Timer enables you to switch on the air conditioner automatically after a given time. You can select the On timer only when the alr conditioner is off. You can defect the On timer when the air conditions operates in the Cool or Dry mode.
Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given time. You can select the Off timer only when the air conditioner is on. You can select the Off timer when the air conditioner aerates in the Cool or Dry mode. Remote Control Control Panel Check that the air conditioner has been switched o press the (1 (On/Off) button.
Setting the Sleep Timer The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after 8 hours. = if you wish to switch the unit off at a specific time, refer to page 13. Remote Control Control Panel 1 Marks sirs that you have selected the Cool mode. Power 2 Press the button on the remote control or Press the button on the unit. Result: + Each teems you press a button, the unit beeps. + The "8" will be displays.
Selecting Energy Saving Mode If you wish to save energy when using your air conditioner, select the energy saving mode. 1 To select the energy saving mode, press the button on the remote control or button on the unit one or more times until the Energy Saver indicator lights up. i Remote Control Control Panel Bessel: # The fan and compressor cycle on and oft together. + The fan will continue fo run for a short dime after the compressor cycles off.
Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. Mode indoor Temperature Outdoor Temperature Indoor Humidity 21°C to 32°C approx. 21°C to 43°C approx. 80% or less Cooling Her Higher temperature The automatic protection feature may be triggered and the air conditioner stopped. Lower temperature A water leakage or some other malfunction may happen if the heat exchange freezes.
Cleaning Your Air Conditioner Be sure to clean the air filter periodically to maintain the air conditioner in the best condition for a long period of time. fF When cleaning the air conditioner, turn it off and pull out the power plug. 1 Open the front grille by pulling the tabs on both sides of the grille. Then lift it up slightly to open the front grille completely. 2 Grab the tabs on the fitter and pull it up and out. 3 Remove ali dust on the air filter with a vacuum cleaner or brush.
Solving Common Problems Before contacting an authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Problem Explanation / Solution The air conditioner does not operate at all ¢ Check that the circuit breaker used for the alr conditioner has not hen triggered, 4 Check that the power cable is plugged into a wall socket and the socket is switched on, if necessary.
LIMITED AIR CONDITIONER WARRANTY This quality product is warranted to be free from manufacturer's defects ir material! and workmanship, provided that the unit is used ruder the normal operating conditions tended by the manufacturer. ‘This warranty is available only ta the person to whom the unt was originally sold by Danny or by an authorized distributor of Danny, and is non-transferable.