Owner’s Use and Care Guide Guide d’utilisation et soins de Propriètaire Model • Modèle DPAC9010, DPAC10010 CAUTION: Read and follow all safety rules and operating instructions before first use of this product. MISE EN GARDE : Veuillez lire attentivement les consignes de sécurité et les directives d'utilisation avant l'utilisation initiale de ce produit.
WELCOME Thank you for choosing a Danby appliance to provide you and your family with all of the “Home Comfort” requirements of your home, cottage, or office. This Owner’s Use and Care Guide will provide you with valuable information necessary for the proper care and maintenance of your new appliance. If properly maintained, your Danby appliance will give you many years of trouble free operation.
IMPORTANT SAFETY INFORMATION READ ALL SAFETY INFORMATION BEFORE USING ELECTRICAL SPECIFICATIONS TABLE 1 1) Check available power supply and resolve any wiring problems BEFORE installation and operation of this unit. All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician. Suggested Individual Branch Circuit Nameplate Amps *AWG Wire Size 9.
IMPORTANT SAFETY INFORMATION (cont’d) ENERGY-SAVING TIPS Your Danby appliance is designed to be highly efficient in energy savings. Follow these recommendations for greater efficiency. 2) The air filter is very efficient in removing airborne particles. Keep the air filter clean at all times. 4) Start your air conditioner before the outdoor air becomes hot and uncomfortable, to avoid an initial period of discomfort while the unit is cooling off the room.
INSTALLATION ELECTRIC SHOCK HAZARD: To avoid the possibility of personal injury, disconnect power to the unit before installing or servicing. Caution: To avoid installation/operation difficulties, read these instructions thoroughly. Flexible Exhaust Hose (13cm) & Exhaust nozzle connector (2 pcs)... from 17 7/10 (45cm) to 53 1/6” (135cm) Flexible Exhaust Hose (11cm) & Exhaust nozzle connector (2pcs)...from 15 3/4” (40cm) to 51 1/5” (130cm)1 Adjustable sliding window/door kit (3 pcs)...
OPERATION Receiving Sensor Warning Light KEY PAD FUNCTIONS NOTE: By pressing both buttons at the same time for more than 3 seconds, the display will toggle between Celsius and Fahrenheit. POWER SWITCH: Turns unit ON/OFF MODE: Allows you to scroll through and select desired operating mode. Warning Light FAN: Select from three different fan settings; High, Medium, and Low. Condensed water may accumulate in the unit.
OPERATION (cont’d) AIR CONDITIONING NOTE: The exhaust hose must be properly vented outdoors during air conditioning mode. 1) Press the POWER SWITCH key (Fig. A) to switch on the unit, and the previous set temperature will be shown in the temperature display area of the control panel. 2) Press the MODE key (Fig. B) until the COOL indicator light illuminates on the control panel (Fig.C). Each depression of the MODE key will advance to a different mode setting (Cool- Dehumidifier-Fan) Fig. A Fig.
OPERATION (cont’d) The AUTO-TIMER feature offers a unique selection of multiple choice, fully automatic on and/or off (start/stop) programs between 1-24 hours under any one mode of your Home Comfort unit. The programs are as follows: turn the unit ON / OFF automatically at specified a) Auto-Off: Pre-select a time that will turn off the times (between 1-12hrs). unit automatically (between 1-12hrs).
CARE AND MAINTENANCE CLEANING THE UNIT wiring insulation. CAUTION: Before cleaning or servicing this unit, disconnect from any electrical supply outlet. 3) Unplug the unit. 1) DO NOT use gasoline, benzene, thinner, or any other chemicals to clean this unit, as these substances may cause damage to the finish and deformation of plastic parts. 4) Clean the unit by wiping off any dirt/dust with a soft damp cloth or vacuum cleaner, then wipe dry with a dry soft cloth.
TROUBLESHOOTING Occasionally, a problem may occur that is minor, and a service call may not be necessary. Use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot for assistance, or Danby’s Toll Free Number: 1-800-26PROBLEM 1) Unit does not work POSSIBLE CAUSE • Power is out. • The plug is not plugged in properly. • The full-tank indicator is ON; tank is full. • Current leaking or pressing test button on LCDI plug.
BIENVENUE Merci d’avoir choisi un appareil Danby qui vous fournira ainsi qu’à votre famille, le confort au foyer, à la maison, au chalet ou au bureau. Ce manuel d’utilisation vous offre des renseignements pratiques pour le soin et l’entretien de votre nouvel appareil. Un appareil Danby bien entretenu vous fournira plusieurs années de service sans ennui.
CONSIGNES DE SÉCURITÉ IMPORTANT LISEZ TOUTE L'INFORMATION DE SÉCURITÉ AVANT UTILISATION SPÉCIFICATIONS ÉLECTRIQUES TABLEAU 1 1) Vérifier l’alimentation de courant disponible et résoudre tout problème AVANT l’installation et l’usage de cette unité. Le câblage doit être conforme aux codes local et national de l’électricité avec l’installation par un électricien qualifé. Pour toutes questions concernant les directives qui suivent, communiquer avec un électricien qualifé. 2) Cet appareil débite 7.
CONSIGNES DE SÉCURITÉ IMPORTANT (suite) ÉCONOMISEUR D’ENERGIE Votre appareil ménager Danby est conçu pour l’efficacité en économie de l’énergie. Pour le rendement maximal, observer les recommandations qui suivent. inconfortable. Ceci préviendra une période initiale d’inconfort avant que l’unité ne puisse refroidir la pièce. L’usage de la caractéristique de MINUTERIE programmable d’arrêt et de mise en marche automatique représente un important avantage à cet effet si elle est utilisée à pleine capacité.
INSTALLATION RISQUE DE CHOC ÉLECTRIQUE: Pour éviter la possibilité de blessures corporelles,débrancher l’alimentation de courant à l’unité avant d’entreprendre l’installation ou le service. MISE EN GARDE: Pour éviter les difficultés durant l’installation et/ou le fonctionnement, lire ces directives attentivement.Il devrait y avoir au moins 11.8dégagements (de 30cm) entre l'unité et tous les autres objets ou fondations, et devrait être installé sur une surface de niveau.
FONCTIONNEMENT Détecteur récepteur Lampe témoin Remarque : En appuyant sur les deux boutons en même temps pendant plus de 3 secondes, l’affichage alternera entre les degrés Celsius et Fahrenheit. FONCTIONS DU BLOC NUMÉRIQUE INTERRUPTEUR D’ALIMENTATION : Permet de mettre l’appareil en MARCHE/ARRÊT Affichage ACL Mode de climatisation MODE: Vous permet faire défiler et de sélectionner le mode de fonctionnement désiré.
FONCTIONNEMENT (suite) CLIMATISEUR: NOTE: Le tuyau flexible pour l’échappement d’air doivent être installés pour le fonctionnement en mode de climatisation 1) Appuyer sur la touche INTERRUPTEUR (Fig. A) pour activer l’unité et le réglage précédent du température sera montrée dans l’affichage de la température sur le panneau de commande. 2) Appuyer sur la touche MODE (Fig. B) jusqu’a l’indicateur du mode Frais illumine sur le panneau du commande (Fig. C).
FONCTIONNEMENT (suite) Le dispositif de MINUTERIE AUTOMATIQUE offre un choix unique de choix multiple, complètement automatique sur et/ou outre des programmes (de début et de fin) entre 1-12 heures sous n'importe quel mode de votre unité à la maison de confort.
SOINS ET ENTRETIEN NETTOYAGE DE L’UNITÉ MISE EN GARDE: Avant de nettoyer ou de faire le service sur cette unité, il est recommandé de débrancher le cordon d’alimentation de la prise de courant électrique. 1) NE PAS utliser d’essence, de benzène, de diluant ou tous autres produits chimiques pour nettoyer cette unité. Ces substances pourraient causer des dommages au fini et une déformation des pièces en plastique.
DÉPANNAGE De temps en temps, un problème peut se poser qui est mineur, et une intervention peut nepas être nécessaire. Employez ce guide de dépannage pour une solution possible. Si l'unitécontinue à fonctionner incorrectement, demandez un dépôt autorisé de service ou le numéro de appel sans frais Danby: 1-800-26PROBLEME 1) L'unité ne fonctionne pas. 2) L'unité arrête soudainement durant son fonctionnement. CAUSE PROBABLE SOLUTION • Il n'y a pas d'alimentation. • La fiche n'est pas branchée adéquatement.
Model • Modèle DPAC9010, DPAC10010 PORTABLE AIR CONDITIONER The model number can be found on the serial plate located on the back panel of the unit. For service, contact your nearest service depot or call: 1-800-26(1-800-263-2629) to recommend a depot in your area. All repair parts are available for purchase or special order when you visit your nearest service depot. To request service and/or the location of the service depot nearest you, call the TOLL FREE NUMBER.