7 = INSTALLATION INSTRUCTIONS COMMANDANT gar I FOR 2" & 3" COMPLETE TOILET REPAIR KIT forearm DL: Gluons WARNING DO NOT USE IN-TANK DROP-IN TOILET BOWL CLEANERS. Use of such products will RESULT IN DAMAGE to tank components and MAY GAUCHE FLOODING and PROPERTY DAMAGE and VOID WARRANTY. DO NOT over tighten nut or tank/bow! may crack. Inspect unit every 6 months and replace if there are any signs of cracking, deterioration, or wear and tear.
7 = INSTALLATION INSTRUCTIONS | FOR 2" & 3" COMPLETE TOILET REPAIR KIT Step 7: Step 8: Top of Ci Tank Port Thumb Screw fil Valve The Port Ling must. Attach Refill Tube to Refill Tube Port JE rl the top the overflow tube. oer Fil Refill Tube with Clip an! ron rn BRO be Clip to top of Overflow Tube 7 ube Tb Neck | | Ye Internal Fill | female, Valve Adjustment {dustmen Rib Body Setting Fill Valve a fF. A Install Refill Tube: To install Refill Tube, attach one end of refill tube to Tube Port.
<< \ id Herramientas necesarias: £ Cubeta Tijeras A ge Grandes Esponja Preparar el tanque: Cierra la válvula de suministro de agua y descarga el inodoro hasta vaciar el tanque. Retira el agua que quede en el tanque con una esponja o una toalla. Desconecta la tuerca de acoplamiento de la linea de suministro de agua de! tanque inferior de la válvula de llenado Airando 1a tuerca de acoplamiento en sentido de las manecillas del reloj.
7 = INSTRUCCIONES DE INSTALACIÓN KIT Dan DE ACABADOS DE DESCARGA TOTAL Paso 7: . Puerto La linea del puerto Parte superior . | debe estar al menos Tapa del tanque Tornillo de ajuste manual 1% por encima de la parte superior del tubo de rebose.