- Dane-Elec Md-H101T1E23S Myditto 2-Bay Home Network & Key Server Manual

my-Ditto User Manual

Case:

Power LED is off.

Solution:

1. Make sure the power cords are properly connected both to my-Ditto and the power

source.

2. Switch my-Ditto Off and then On again.

Case:

LAN LED is off.

Solution:

1. Check that the Ethernet cable is properly connected to both my-Ditto and your

router.

2. Make sure your Ethernet router is working.

Case:

STATUS LED is off.

Solution:

1. Make sure that my-Ditto is Switched On and connected to the router.

2. Check that my-Ditto is not blocked by any firewall, network switch, or router.

Case:

STATUS LED is flashing.

Solution:

Check that my-Ditto is not blocked by any firewall, network switch or router.

Case:

USB 1/2 LED is off - USB key/Device has not been recognized.

Solution:

1. Remove the USB key/device.

2. Wait a few minutes and plug in the USB key/device again.

Case: