Operation Manual

19
Using for theFirst Time
ChargingtheBattery
* Charging the Batterybefore using your player.
* While the playeris connected to thecomputer via USB cable,it will charge itsbuilt-in
battery. Thebattery is fully chargedin about 3 hours.
* Check if theplayer is connected toa high-power USB2.0 port.Some low-power USB
ports available in keyboardsand other USB hubsmay not provide enoughpower to
charge or sync theplayer.
* If the computeris in sleep mode,the player may notbe charged.
The Remaining Battery Chargeicon indicates the remainingtime the battery canbe
used. The morethe battery is used,the fewer the numberof segments in theicon.
Full Charged
Partially Discharged
Fully Discharged
To
ChargethePlayer withAC Adapter
USB port on theplayer
USB Chargeable Cable
Power Supply Jack
1. Connect the AC adapter (not provided) and the player.
2. During Power On
To charge the playerwith ACadapter, USB-DC adapter is required.
Connect the USBend to the player and anotherend to thepower supply jack.
The ACadapter for theplayer uses inputvoltage of 100~240Vand 50/60 Hz.
Connect it to thecomputer using the USBcable supplied in thepackage during
the player powered on.It will charge itsbuilt-in battery and appearsas the figure.
In the normal Windowsenvironment, as soon asthe
cable or simple USBjack is connected, themessage
"Searching for new device"appears and USB driveris
installed automatically.For Windows 98SE, putthe
included CD-ROM in yourdisk drive, then followthe
instructions on your PCscreen to install theUSB drive.
ConnectingMiniPlayer
Connecting MiniPlayer
Note: While connecting toPC, tracks and operationscannot be applied. Pullingout the
PC connection cable fromthe player before yourlistening to music /viewing a picture
and so on.
2. While connecting the player and power
supply, it will power on automatically.
The battery isfully charged in about 2.5 hours.
18
B
as
ic Operati
on
2