Quick Start Guide

1.Connecttothepowersupply.
2.ConnecttheEthernetcablefrommyDittotoyourrouter.
3.Switchthepowerbuttonto
On.
Turning myDitto O󰮏
PresstheRELEASEbuttonfor2seconds,oruntilabeepisheard.AllLEDindicatorswillturn
o󰮏,withtheexceptionoftheLANLED.Nowwaitanadditional10secondsandthenswitch
thepowerbuttonto
O󰮏 atthebackofthedevice.
Connect
Note: Beforeyoustart,makesureyourrouterisworkingandconnectedtotheInternet.Powering
upshouldtakeapprox.1minute.Oncecompleted,theLEDindicatorswillbecomeilluminated,as
shownintheaboveimage.
Lights On
C