User manual

19
NB: If you want to create a slide show with music:
- Select “ALL” red button on the remote control to have access to all data. If you want only music select
music, photo select photo, video select video, the icone change on the top left screen corner each time
you use a button.
- Select the source from where you want to read the photos and music
- Select the first photo
- Enter
- Please don’t forget to put in the same folder photos and music in MP3 format.
Network
My shortcut
Select a PC in the menu or add one available IP address, individuals can access the media files in
network through My_Shortcuts.
File Copy
The File Copy allows individuals to copy files between HDD, USB, NET. Select COPY on the remote control.
It is very easy to copy files between various devices.
Press COPY button on the remote control, then individuals can copy files from LOCAL HDD, USB DEVICE,
NETWORK from a media to another.
NB: HDD and Flash Memory Card must be formatted in FAT 32 if you need to write on these devices.
Copying operation
Step 1: Select Source Device
Press
and
to select the device which need to copy at first after entering the File copy interface.
Then press
to select Destination Device, press to return.
Step 2: Select Destination Device
Press
and
to select the device of the Destination after go to Destination sector. Then press to
next step, and press
to return.
Step 3: Select copy files or folders
At Source sector, press
and
to select and press PLAY to select file or folders which need to copy.
“√”.appears at right side of selected file or folder. Then press
to next step, and press to return.
Step 4: Select the folders of Destination
Press
and
to select a target folder at the destination sector. Then press to next step, and press
to return.
Step 5: Copy Status
At top menu, select ENTER to copy, select No to cancel.
After copy finishing, the system will display “File Copy is completed!”, or will display “File Copy failed!”
.Select “ENTER” to browse the copied files, or select “No” to return to Video.