User manual

Chapter 4: Connecting So Smart to a Network

4.3 Wireless Network

So Smart player is equipped to be connected to your

Wireless Network and is capable of streaming media ﬁles

directly from your PC.

Upon completing the setup as described below, the

So Smart player will acquire the IP address automatically

from your router.

NOTE: Try to use Wireless setup in an environment with

minimal interference. Avoid Wireless setup if streaming

hi-def video ﬁles.

Under SETUP menu, select “NETWORK”. Use the arrow

keys and select ENABLE. Navigate and ENTER / SELECT the

“Wireless” Network option.

So Smart HDMI

Once the “Wireless” option is chosen,

Select “Wireless Apply” setup to apply your prefered

setting. the system will try to acquire the IP address

automatically from the router

The Advanced “WIRELESS” settings menu (as shown

under) will be automatically displayed for modifying

and conﬁguring wireless settings.

Selecting “Scan ESSID” and ENTER or Autoscan ESSID

(depending on your ﬁrmware version.).

You must enter the SSID of Access Point (AP) or your router.

Select your network name.

CHANNEL: Choose the radio channel being used by your

network router or Auto is default.

ENCRYPTION: Unless you are running Encryption settings

on your Router, choose NONE. (refer: next page)

WEP KEY: If using WEP-Encryption on router, manually input

WEP key here. (refer: next page)

Select “Apply” to apply wireless network settings.

SUCCESS versus FAIL shows network connectivity status

Press SETUP button on the So Smart Remote to apply and

conﬁrm all setup options and conﬁgurations.