User Manual

FAB

Distortion

I NSTRUCTIONS

D-1

EEC Agent:

John Hornby Skewes & Co., Ltd.

Salem House, Parkinson Approach,

Garforth, Leeds LS25 2HR UK

This product compl ies with FCC Part 15 ru les.

Operation of t his product is permitted in USA

provided this product does not cause harmful

interference and p rovided this product accepts

interference from other devices, even if that

interference is d etrimental to performance of

this product.

PAGE 1
FAB Distortion This product complies with FCC Part 15 rules. Operation of this product is permitted in USA provided this product does not cause harmful interference and provided this product accepts interference from other devices, even if that interference is detrimental to performance of this product. EEC Agent: John Hornby Skewes & Co., Ltd.
PAGE 2
D-1 Instructions FAB DISTORTION: TONE: LEVEL: Adjusts the amount of Distortion Adjusts the EQ Adjusts the output level Distortion TO BEGIN: • Connect instrument cable to the IN jack. Connect amplifier cable to the OUT Jack. If using an AC Adapter, connect to DC-9V jack. Or use 9Volt battery. • LED light will be on when foot switch is activated. INPUT 9V DC OUTPUT CONTROL FUNCTIONS: LEVEL: This control sets the level of the output to the amplifier. TONE: Rotate this control to adjust the EQ.