FAB Slap Echo EEC Agent: John Hornby Skewes & Co., Ltd.
D-4 Instructions FAB REPEAT: MIX: Adjusts the number of echoes Adjusts the amount of echo effect Slap Echo TO BEGIN: • Install 9-Volt battery (included). If using Danelectro’s “Zero Hum” adapter (Recommended) instead of a battery, connect this to the “9V DC” jack on the back of the D-4. • Connect an instrument cable from your guitar to the “Input” jack. Connect a second cable from the “Output” jack of the D-4 to the input jack of your amplifier. • LED light will be on when foot switch is activated.
