| Electrode: Tue Lusaka Commas D-8 Instructions TO BEGIN: + CONNECT INSTRUMENT GABLE TO THE INPUT JACK. CONNECT AMPLIFIER CABLE TO THE OUTPUT JACK. IF USING AN AC ADAPTER, CONNECT TO SV DC JACK. OR USE B-VOLT BATTERY. + LED LIGHT WILL BE ON WHEN FOOT SWITCH IS ACTIVATED. CONTROL FUNCTIONS: REPEAT: SETS THE DELAY REPEATS WHEN THE PEDAL IS ON. AT MINIMUM (FULLY COUNTER-CLOCKWISE) THERE, WILL BE ONE REPEAT OF A PLAYED NOTE. AT MAXIMUM (FULLY CLOCKWISE) THERE WILL BE MULTIPLE REPEATS THAT SLOWLY FADE.
