Quick start GPS GS510 1
Summary Quick start ......................................................................................................................... 1 Précautions d’usage........................................................................................................... 3 Getting Started .................................................................................................................. 4 Operating Basics .........................................................................................
Précautions d’usage . For your own safety, do not operate the controls of the product while driving. . Use this product prudently. The product is intended to be used only as a navigation aid. It is not for precise measurement of direction, distance, location or topography. . The calculated route is for reference only. It is the user's responsibility to follow the traffic signs and local regulations along the roads. .
Getting Started 1.1 Understanding Hardware Features Front Components 2 1 Ref 1 2 Component Touch Screen Charge Indicator Description Displays the output of your device. Tap the Screen with your fingertip to select menu commands or enter information. Glows bright amber to indicate that the battery is charging, and turns green when the battery is fully charged.
Top Components 1 Ref 1 Component ON/OFF Switch Description The main power/battery cut off switch. Side Components 3 1 4 2 Ref 1 2 3 4 Component microSD Slot Mini-USB Connector Headphone Connector AV IN Description Accepts a microSD (Secure Digital) card for accessing data such as Music. Connects to the USB cable. Connects to stereo headphones. 1.
The charge indicator glows red when charging is in progress. Do not disconnect your device from AC power until the battery is fully charged, when the charge indicator turns amber. This will take a couple of hours. NOTE: . Do not immediately turn on your device after connecting the AC adapter to charge a power-depleted battery. If you need to turn on the device again, wait for at least one minute. . Your device can also be charged when it is connected to a desktop computer via the USB cable.
2.2 Turning On and Off / sleeping mode 1. Use the ON/OFF button to turn on and off your device. 2. If want to turn off the device, press the ON/OFF button for several seconds. Your device will appearing the menu of turning off. 2.3 Main Menu The first time you initialize your device, the Main Menu appears. The Main Menu is your starting place for various tasks. Tap a button to start a task or open other menu.
2.5 Inserting a microSD Card Your device has a microSD slot where you can insert an optional Secure Digital storage card. Using Device Settings To open the Device Settings menu, first tap the Settings button on the main menu, the setting main menu appears as shown below. Setting Then the PND enters into the setting submenu. Tap The following sections describe these buttons and their functions. You can customize the device settings such as backlight, volume, date and time.
Calibrate You can calibrate the touch screen if it is not responding accurately to your Taps. 1. Tap button on the setting submenu. The calibrate Function menu appears as shown left below. 2. Tap and hold the centre of the target, the target moves to the position of left up. When again tap and hold the centre of the target, the target moves the Next position of left down. 3. The target moves to five position (Left-up' left-down' right-up' right-down' Center) in order, forming a period.
ActiveSync: When selecting ActiveSync and save setting. For the first time, please note the change of PC and follow the steps to install the connection. Tap “browse” button, open the motion device menu. Now you can copy something in or out on PC and the PND also can perform synchronously along with PC. GPS Receiver NOTE: This page is for information only. You can view the number of satellite signals the unit is receiving and also the strength of these signals. 1.
1. Disconnect all cables, including the AC adapter, from your device. 2. Press the ON/OFF button to the OFF position. 3. Wait for l minute and then press the button back to the ON position. ON/OF 4. Your device turns on. Troubleshooting and maintenance Power Problems Power does not turn on when using battery power The remaining battery power may be too low to run your device. Connect the AC adapter to your device and to AC power. Then, turn on your device. Screen Problems Screen is off .
GPS Problems When there are no valid signals available, consider the following: . Make sure that the GPS antenna has a clear view of the sky. . Note that the GPS reception can be affected by: - Bad weather - Dense overhead obstacles (e.g. trees and tall buildings) - Other wireless device in the car - Reflective car window tint Maintaining Your Device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage to your device. .
