Operation Manual

 ActiveSync:

When selecting ActiveSync and save setting.

For the first time, please note the change of PC and follow the steps to install the connection.

Tap “browse” button, open the motion device menu.

Now you can copy something in or out on PC and the PND also can perform synchronously

along with PC.

GPS Receiver

NOTE: This page is for information only. You can view the number of satellite signals the unit

is receiving and also the strength of these signals.

1. Tap “GPS Receiver” button on the main menu.

2. The GPS Receiver Function menu appears as shown right-up.

This page gives your current position in degrees longitude and latitude, your current speed

and the status of your position, i.e. Fixed 3D or Fixed Invalid etc.

The compass circle shows the satellites that the unit is receiving and the bar chart below

shows the strength of the signal from each of these satellites.

Occasionally, you may need to reset your device. For example, you should reset your system

when it stops responding; or appears to be "frozen" or " locked up" .

Resetting Your System

Insert a small rod, such as a straightened paperclip, into the reset button on the bottom of

your device. This is called a "soft reset." The Main Menu should appear after a soft reset.

If your device still does not respond after a soft reset, you can use the following steps to

perform a "hard reset."

RESET