Operation Manual

9
You can calibrate the touch screen if it is not responding accurately to your Taps.
Calibrate
1. Tap button on the setting submenu. The calibrate Function menu appears as
shown left below.
2. Tap and hold the centre of the target, the target moves to the position of left up. When
again tap and hold the centre of the target, the target moves the Next position of left down.
3. The target moves to five position (Left-up' left-down' right-up' right-down' Center) in order,
forming a period. If nicetily tap and hold the target each time, after a period, the target is
Disappear, the device completes the calibration process and backs to the Device Settings
menu.
Please connect your PND to the PC with USB cable.
USB Setting
1. Tap button on the setting submenu. The USB setting menu appears
as shown below.
There are two setting styles: Mass storage & Active Sync.
 Mass storage:
When selecting the Mass storage and save setting, the PND will be used as a storage card.
You can browse the PND storage card and record some folders or files into it freely throng PC
such as a navigation map.