User Manual

6
Bluetooth function
(Lift up the tone arm and put it on the Tone Arm Holder position)
● Turn on the Power ON-OFF/Volume button⑩, then adjust function selection button ⑨ to the BT position
into the Bluetooth mode.
Note: when the function selection button display the blue light,it is Bluetooth model
●Turn on the Bluetooth function of your device and enable the search or scan feature to find the Bluetooth
pairing name “TE-2018”. Select "TE-2018" from the device list when it appears on your device screen. If
required, enter the pass code “0000” to pair (link) with your device.
● It will sound a ‘beep’ if connected successful, then you can play music from your Bluetooth device.
● Adjust volume by volume control ⑩or by your Bluetoothdevice.
Tips: The Bluetooth will connected automatically if you connected before.
Aux in function
(lift up the tone arm and put it on the Tone Arm Holder
position)
 Turn on the Power Switch ⑩, then adjust the
function selection button ⑨ to the AUX
position,then the button will display the blue and
orange light.
 Insert aux in cable (not supplied) to Aux in jack
⑪the other side of aux in cable connect your
devise, then you can enjoy the music.
 Adjust volume by volume control⑩ .
Amplifier Connection (if required)
Whilst you can listen to your new Retro Suitcase Turntable using the built in speakers, you may also wish to
connect it to your existing Hi-Fi system. Connect the “line out” RCA ports to the “line input” on your
mixer or amplifier using an RCA cable (notsupplied).

Red plug into the Right Channel Input.
 White plug into left Channel Input.