Product Overview

ManualsBrandsDanfoss Hago ManualsGas and Oil Burner AccessoriesType B Solid 45° Brass Oil Nozzle (0.75 GPH)

Oil Nozzles Type H, S-S and B

Data sheet

Application

Danfoss Hago oil nozzles are designed for

domestic and commercial high pressure oil

burners operating with light or heavy fuel.

An optimal combustion process is only achieved

by a perfect match between nozzle capacity and

spray pattern, air supply and air distribution and

the design of combustion chamber.

Danfoss Hago offers a very broad range of

nozzles with different capacity and spray

patterns – which means that it is possible to

cover all demands in the market.

Features: Light and heavy fuel.

Identification

The nozzles are marked with the following

information (example):

SOLID60°B

0.65

12345

Stamped on the flats

0.65 Reference capacity (USgal/h)

60°B Spray angle and pattern (B=Solid, S-S=Semi Solid and H=Hollow)

SOLID SOLID for “Solid” spray pattern. Only on B nozzles

Batch code for internal use

Reference specification point* GPH at 100 psi, (~ 7 bar) 35 SSU (2.7 cSt)

Technical Data

Material and construction

Nozzle tip and disc AISI 416 grade stainless steel

filters size dependent

Recommended and maximum tightening

torque

Recommended 200-310 in-lbs (25-30 Nm) and

max. 310 in-lbs (35 Nm) for steel and nickel

plated adapters.

Recommended 130-180 in-lbs (15-20 Nm) and

max. 220 in-lbs (25 Nm) for brass adapters.

Filters

Capacity from 1.50 GPH

120mesh stainless steel strainer

Capacity 0.40 – 1.35 GPH

30-40μm sintered bronze filter

* Test specification point equivalent: 1000 kPa (10 bar), 3.4 cSt., 840 kg/m

Summary of content (4 pages)

PAGE 1
Data sheet Oil Nozzles Type H, S-S and B Application Danfoss Hago oil nozzles are designed for domestic and commercial high pressure oil burners operating with light or heavy fuel. An optimal combustion process is only achieved by a perfect match between nozzle capacity and spray pattern, air supply and air distribution and the design of combustion chamber.
PAGE 2
Data sheet Design Oil Nozzles Type H, S-S and B A: B: C: D: Tip Disc Bronze filter or strainer Locknut C D A B C Available spray patterns: H: Hollow Cone (red caps) Hollow spray pattern with higher volume concentration in the periphery of the spray. Well suited for low firing rates and burners with hollow air pattern. S-S: Semi Solid Cone (blue caps) Semi solid spray pattern which is the optimal choice for applications where exact air pattern or spray pattern requirements can’t be established.
PAGE 3
Data sheet Oil Nozzles Type H, S-S and B Dimensions Dimensions for reference only. Program Reference capacity (Usgal/h) Hollow Semi Solid Solid 45° 60° 80° 45° 60° 80° 45° 60° 80° 0.50 - - - - - - - 030G6408 030G6508 0.60 - - - - - - 030G6312 030G6412 030G6512 0.65 030G6014 030G6114 030G6214 030G6614 030G6714 030G6814 030G6314 030G6414 030G6514 0.70 030G6015 030G6115 030G6215 - - - - - - 0.
PAGE 4
Data sheet Oil Nozzles Type H, S-S and B Danfoss Toronto, ON/Baltimore, MD Toll Free: 888-DANFOSS (326-3677) Option #3 for Heating heating.danfoss.us heating.cs.na@danfoss.com Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary eady agreed.