Product Overview

Data Sheet RX-C Roof Clip Glue
© Copyright 2016 Danfoss VDLWB122 . 04/16 TEL: [phone], FAX: [phone]
General
Information
The Danfoss RX-C Roof Clip Glue is a versatile, high-
strength, one-part, hard-setting, pick-proof adhesive
sealant. It oers superb tensile strength with
excellent resistance to nature, by being both water-
and weather-proof.
The glue is designed for use with Danfoss RX-C Roof
Clips - a clip used to secure Danfoss RX cables to
asphalt shingles/metal roofs & gutters. Not recom-
mended for membrane and rubber roofs.
Benets:
• High-strength
• Flexible
• Hard-setting
• Weather-resistant
• Fast-skinning
• Durable bond to material
• Does not crack or become brittle
• Easy application
• Long service life
Ordering Information
Part No. Description Packaging
Roof Clip Glue RX-C Roof Clip Adhesive
10.3 . oz.
cartridge
Shelf Life & Storage
Application
Curing Process
Part No. Description Qty
088L3001 RX-C Roof Clips
50 per bag
For Use With RX-C Roof Clips:
12 months from the time of shipment from Danfoss. Please note that RX-C Roof Clip Glue may last
many years in an unopened container if stored properly. Unopened containers should be stored in a
cool, dry area. Keep above 50°F (10° C) before use.
Interface and surfaces must be clean, dry and free of dust, dirt, oil and water-proong
and release agents. Cut cartridge nozzle at desired size and puncture inner seal. Apply bead size as
desired. Apply uniform bead with steady pressure. Tool immediately after application to ensure full
contact with both sides of the joint area. Sealant starts to skin over in 20-25 minutes. Minimum
application temperature is 50° F (10° C). Not recommended for soft expansion joints,
polystyrene or styrene containing plastic.
With an  ” bead, RX-C Roof Clip Glue is 80% cured after 3 days in 50°F temperatures or higher
and 90% cured within 2 weeks. Colder temperatureswill stall curing process.