Submittal Sheet

ManualsBrandsDanfoss ManualsHeating SuppliesESBE CRA122 Setpoint Control (w/ Built-In Temperature Controller)

VDCPC222 © Danfoss 10/15

Data Sheet

ESBE CRA122

Setpoint Control

Features:

Ordering

Information:

Accessories/

Replacement Parts:

Applications:

The ESBE CRA122 is a combined actuator and

constant ow temperature control with an

adjustable temperature setting. This control is

a direct replacement for the 92K2 control. The

CRA122 monitors and maintains the setpoint of

water or air temperature on mixing or diverting

applications by modulating ESBE 3-way or 4-way

valves in the recommended sizes ranging

from 2-1/2” to 6”. The CRA122 setpoint control

can also be used with smaller sized VRG valve

bodies with the use of the VRG to Series 90

mounting kit code no. 193B1616.

Benets:

•Complete control package; actuator,

sensor* and controller included *Included

sensor is 4.9 ft/1.5m, but optional 16 ft/5 m

cable can be purchased (17053100)

•Simple ‘keypad’ menu and settings

•LCD backlit digital display

•Directly mounted to ESBE valve bodies

•Adjustable setpoint temperature range of

41° to 203°F (5° to 95°C)

•Able to maintain two unique setpoint

temperatures (ex: 120°F and 140°F)

•Selectable rotation speed of actuator

Code No. Series

Required Power

Supply

Selectable Run Time

(90° @ 60Hz)

Designed for Use With

12742212 CRA122 3-point oating 12/25/50/100/200/398

seconds

ESBE (All Valve Sizes)

Code No. Description

193B1615 Replacement actuator mounting kit for MG, G, & F series

193B1616 Actuator mounting kit to ESBE VRG valve

17053100 CRA911 Temperature sensor, 16ft (5m)

3-Way Mixing Application

The CRA122 can be utilized to regulate the

water temperature for a mixing application. The

controller ensures the appropriate supply water

temperature is being maintained to the system.

Temperature

Sensor

Summary of content (3 pages)

PAGE 1
Data Sheet ESBE CRA122 Setpoint Control Features: valves in the recommended sizes ranging from 2-1/2” to 6”. The CRA122 setpoint control can also be used with smaller sized VRG valve bodies with the use of the VRG to Series 90 mounting kit code no. 193B1616. The ESBE CRA122 is a combined actuator and constant flow temperature control with an adjustable temperature setting. This control is a direct replacement for the 92K2 control.
PAGE 2
Data Sheet ESBE CRA122 Setpoint Control Applications: Data Sheet 3-Way Diverting Application ESBE CRA122 Setpoint Control Electrical Wiring: Temperature Sensor When the CRA122 is assembled on a 3-way valve installed in a diverting application, the controller can monitor return water temperature and adjust the valve appropriately.
PAGE 3
ESBE CRA122 Setpoint Control Data Sheet Adjustment of Rotation: ESBE CRA122 Setpoint Control Dimensions: (mm) 4.9” (124) Within the 90 Series actuators, the factory set 90°of rotation can be adjustable between 30° and 180°. The adjustment of the angle of rotation is set via internal cams within the actuator. Care should be taken to ensure the cams are engaging the switches properly. 1.8” (47) 3.5” (88) Data Sheet 4.6” (117) Manual Operation: 1.