Submittal Sheet

Data Sheet ESBE CRA122 Setpoint Control Data Sheet ESBE CRA122 Setpoint Control
4 5
VDCPC222 © Danfoss 10/15 VDCPC222 © Danfoss 10/15
Danfoss can accept no responsibility for possible errors in printed materials and reserves the right to alter its products without notice.
All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss
Baltimore, MD
Tel.: [phone], Fax: [phone]
www.na.heating.danfoss.com
Danfoss
Toronto, ON
Tel.: [phone], Fax: [phone]
www.na.heating.danfoss.com
Manual Operation:
When placing the actuator in manual operation
power should be turned o to the actuator. In
the event the actuator is powered and is left in
a manual position, the result could lead to the
internal damage of the actuator.
When placing the 90 Series motor in manual
operation, the gray button must be pushed
in. Then the handle can be rotated either
clockwise or counter clockwise. To return back to
automatic operation, rotate the handle until the
button pops out.
Dimensions:
(mm)
4.6”
(117)
4.9”
(124)
1.9”
(48)
1.9”
(48)
1.8”
(47)
3.5”
(88)
CRA122 Control
1.42” (36)
3.54” (90)
2.75” (70)
Adjustment of
Rotation:
Within the 90 Series actuators, the factory set
90°of rotation can be adjustable between 30°
and 180°. The adjustment of the angle of rota-
tion is set via internal cams within the actuator.
Care should be taken to ensure the cams are
engaging the switches properly.