Installation guide

FP735SI
14
GB
Parameter 7 – Keyboard Lock
This parameter sets the unit to operate with
an enabled (functioning) or a disabled (locked)
keyboard.
Press + until parameter 7 is displayed
Press V or Λ to select the required setting.
0 = the keyboard is enabled (default)
1 = the keyboard is disabled (locked)
8.0 Service Interval Timer
FP735Si provides 3 copy functions: Standard Copy, Advanced
Copy and Channel Copy. Standard Copy is the default setting.
If the Advanced Copy function is wanted, it must be changed in
Advanced Programming mode (page 13). Channel Copy is always
available.
Standard Copy
Pressing COPY/i will copy the previous day’s events into the
displayed day. The unit will then display the 1st event for the new
day.
The Standard Copy function is only present if the unit is set to run in
7 day mode, or 5+2 day mode.
9.0 Copy Functions
The FP735Si is equipped with an installer setback service interval
timer. If this feature is required please contact our technical
department. Setting instructions for this gas safety feature are only
available to bona  de heating installers.