User guide

FP735SI

d) Repeat steps b and c to programme

(or COPY) events for the rest of the

week.

To return to RUN mode, press and

release the PROG button. The display

will change to show the current time

(Fig. 13).

Normal Copy Function

1. At step d press the COPY button and the previous day’s events

will be copied into the currently displayed day.

Advanced Copy Function

1. When all 6 events are correct, press the COPY button.

2. Press the DAY button to select which day to copy to.

3. When day is selected press the COPY button.

4. Continue steps 2 and 3 until all the days you would like to copy to

have been copied.

5. To exit advanced copy mode press the DAY button until the day

copied from is selected and press the COPY button.

Note: Advanced Copy can only be used if the Advanced

Fig. 13

a) Press PROG until Event 1  ashes (Fig.

11).

b) Change the time as follows:

i) Use the + or – buttons to alter the

time (press and hold to change in

10 minute increments).

ii) Press NEXT to advance to next

Event for that day.

iii) Repeat steps i and ii above for the

remaining events (Fig. 12).

c) When all events are correct, press DAY to programme events for

the next day. (If a day’s event times are to be repeated in another

day of the week then the COPY function can be used - see below).

1.7.2 Programming in 7-day mode

(Separate programmes for each day of the week)

Fig. 11

Fig. 12