User guide

Danfoss Heating
17
The MODE button allows the operation of the programmed events
to be altered between:
1. Auto mode
a. 6 events
b. 4 events
2. Allday mode
a. Only the  rst and last programmed events run
3. “ON” mode
In the “ON” mode the heating is permanently turned on.
4. “OFF” mode
In the “OFF” mode, the heating is permanently turned o .
Note: When in Auto or Allday modes, the clock symbol is displayed
to indicate the programmed events will be followed.
The FP735Si can temporarily switch o all programmed on events while you
are away on holiday, returning to your programmed settings at a speci ed
date.
Press and hold the DAY button for at least 3 seconds (the display will
show a suitcase and a date with the year  ashing - Fig 28). Now you
can set the date of your return.
The YEAR number will  ash, use the Λ or V buttons to set the year
of your return.
Use the - or + buttons to move to MONTH. The MONTH number will
 ash (Fig 29). Then use Λ or V to set the month of your return.
2.2 Holiday Mode
2.0 Advanced Functions
2.1 Mode
GB