Operation Manual

living connect®

4. Technical settings

4.1 Reinstallation mode

If the thermostat has been removed from the radiator

and needs to be reinstalled (after being used), it is

necessary to activate installation mode to prevent

damage to the thermostat.

To enter installation mode:

Press until M is displayed.

Press to withdraw the spindle.

M ﬂashes.

Reinstall the thermostat on the valve.

Press for approx. 3 seconds to exit.

Please also refer to section 6 regarding removal of the thermostat from the

radiator valve.

4.2 Testing the connection

Press for at least 3 seconds until M is

displayed.

Press until LI is displayed.

Press to make the connection.

LI disappears when the connection is made.

If no connection can be made, the alarm

and antenna symbols ﬂash together.

Refer to “Troubleshooting” at