Operation Manual

living connect®
16
UK
DE
DK
NL
4. Temperature control and adjustment
The temperature is usually
controlled via Danfoss Link
TM
CC,
but may be changed at any time
using the thermostat's buttons. If
this is done, the thermostat sends
a message to Danfoss Link
TM
CC,
instructing it to synchronise the
other thermostats in the room.
The change only remains in effect
until the next programmed period.
Temperature range 4-28°C
5. Troubleshooting
Error code Error
E1 Transmitter failure. Contact your local service technician.
E2 Malfunction in thermostat's front temperature sensor.
Contact your local service technician.
E3 Malfunction in thermostat's rear temperature sensor.
Contact your local service technician.
Antenna
and alarm
bell sym-
bol flash
together
No connection to Danfoss Link
TM
CC, follow the
instructions at www.danfoss.com/living.
Press to change the
temperature.
18
19
20
21
26
25
24
23