Operation Manual

Danfoss Heating Solutions
9
UK
DE
DK
NL
3. Installation - step by step
3.4 Connecting to Danfoss Link
TM
CC
Each thermostat must be connected to the Danfoss
Link
TM
CC. This is best done by standing beside each
thermostat with the Danfoss Link
TM
CC (connected to
the recommended 014G0262 battery
pack).
1. The “Configure room”
menu is displayed.
Select “Room devices”.
2. Select “Add a device”.
3. Press Begin Registration,
and then press and release
on the thermostat.
4. Repeat for each device.
5. Once all devices have been
registered and the Danfoss Link
TM
CC
is placed in its final position, perform
a network test (see separate Danfoss
Link
TM
CC manual).