Datasheet

Data Sheet SONOMETER
TM
1000 – Ultrasonic heat meter
Loop Sequence Window 1 Window 2 Window 3 Window 4 Window 5 Window 6 Window 7
“5”
Tariff loop
5.1 [off] Tariff energy 1 Tariff function 1 (e.g. ‚t 01’) Limit tariff 1
5.2 [off] Tariff energy 2 Tariff function 2 (e.g. ‚t 02’) Limit tariff 2
5.3 [off] Accounting date 1 Accounting date 1 tariff energy 1 ‚Accd 1’
5.4 [off] Accounting date 1 Accounting date 1 tariff energy 2 ‚Accd 1’
5.5 [off]
Accounting date 1
previous year
Accounting date 1 tariff energy 1 ‚Accd 1’
5.6 [off]
Accounting date 1
previous year
Accounting date 1 tariff energy 2 ‚Accd 1’
5.7 [off]
Accounting date 2
tariff energy 1
Accounting date 2 tariff energy 1 ‚Accd 2’
5.8 [off] Accounting date 2 Accounting date 2 tariff energy 2 ‚Accd 2’
5.9 [off]
Accounting date 2
previous year
Accounting date 2 tariff energy 2 ‚Accd 2’
5.10 [off]
Accounting date 2
previous year
Accounting date 2 tariff energy 2 ‚Accd 2’
Loop Sequence Window 1 Window 2
Window 3
[off]
Window 4
[off]
Window 5 Window 6 Window 7
“6”
Monthly value
loop
6.1 Last month Energy
Tariff
energy 1
Tariff
energy 2
Volume
Max.
flow rate
Max.
Power
6.2 Month –1 Energy
Tariff
energy 1
Tariff
energy 2
Volume
Max.
flow rate
Max.
Power
6.3 Month -2 Energy
Tariff
energy 1
Tariff
energy 2
Volume
Max.
flow rate
Max.
Power
...
6.24 Month -23 Energy
Tariff
energy 1
Tariff
energy 2
Volume
Max.
flow rate
Max.
Power
[off] = not active
Simple operation
A push-button mounted on the front of the
calculator is used to switch to the various
displays. The button can be pressed for a short
or long time. A short press of the button ( < 3
seconds) switches to the next display within a
loop and a long press ( > 3 seconds) switches
to the next display loop. The “Energy” window
(sequence 1.1) in the main loop is the basic
display.
The calculator switches automatically to power
save mode if the button is not pressed for
approx. 4 minutes and returns to the basic
display when the button is pressed again. The
loop settings can be programmed to suit the
customer’s individual requirements using the
HYDRO-SET software.
9
DEN -SMT/PL
VD.SH.B4.02 © Danfoss 04/2010