Installation manual

3.2. Mounting the Inverter

For safe handling of the inverter, two people must carry the unit, or a suitable

transport trolley must be used. Safety boots must be worn.

Illustration 3.3: Position the Inverter

Tilt the inverter as shown in the illustration

and place the top of the inverter against the

mounting bracket. Use the two guides (1) at

the top plate to control the inverter horizon-

tally.

Illustration 3.4: Secure the inverter

Lift the inverter upwards (2) over the top of

the mounting plate until the inverter tilts to-

wards the wall (3).

3. Installation

10 L00410580-01_02