User manual

Item Description
Configuration Options:
• Manual
• Automatic
The following settings are obtained automatically if automatic configuration is selected, otherwise they
have to be entered manually. They are only visible when [Configuration → Manual] is chosen.
IP address IP address
Subnet mask Subnet mask
Standard gateway IP address of the Internet gateway. This address can be requested from the
network administrator.
DNS server This parameter can be requested from the network administrator.
6.2.3.
Communication Channel
[0] [Plant]
This menu item is available for TLX CN Pro and TLX CN Pro+ only.
Selection of a communication channel is the first step in configuration of email transmission and
FTP upload.
Illustration 6.5: Communication Channel
Item
Description
Communication channel Select the desired communication channel for FTP upload and email
transmission.
Select ‘GSM’ or ‘Local network’
Default is ‘Not present’
Procedure:
• Select ‘GSM’ to transmit FTP upload and emails via the optional GSM modem.
• Select ‘Local network’ to transmit FTP upload and emails via Ethernet.
Email and FTP upload configuration
Selection of a communication channel is required to define a route for email transmission and/
or FTP upload.
To fully activate email communication or FTP upload, additional configuration is required. For
further information, refer to the sections
GPRS Setup, SMTP Setup and Data Warehouse/ FTP
Upload .
Note that when the communication channel is set to 'Not present', no FTP upload or email
transmission will take place, even when GPRS, SMTP and/or Data Warehouse are configured.
SMS configuration
For SMS communication, no ‘communication channel’ setting is required. For configuration of
SMS communication, refer to the section
Recipient .
6.2.4.
GPRS Setup
[0] [Plant]
Configure the GPRS settings of the inverter here. They are required so the GSM modem can
connect to the internet to send e-mails or upload data to a web portal or FTP server.
6. Setup
L00410583-01_02 31
6