User guide

1 Introduction
1.1 Purpose of the Manual
This user guide provides information on the conguration
and use of the universal BACnet Router UBR-01 from MBS
with Danfoss VLT
®
HVAC Drive FC 102 and VACON
®
100
HVAC, using the embedded BACnet MS/TP communication.
The user guide details:
•
The electrical connection of the RS485.
•
The IP settings of the PC.
•
The settings of the UBR-01 router.
•
The relevant communication parameters of the
frequency converter.
For further settings of the UBR-01, refer to www.mbs-
ugw.de/ubr-01bacnet-router/.
VLT
®
is a registered Danfoss trademark.
VACON
®
is a registered trademark.
BACnet
®
is a registered trademark of ASHRAE.
1.2
Additional Resources
Resources available for the frequency converters and
optional equipment:
•
The VLT
®
HVAC Drive FC 102 Operating Guide
provides the necessary information for getting
the frequency converter up and running.
•
The VLT
®
HVAC Drive FC 102 Design Guide provides
detailed information about capabilities and
functionality to design motor control systems.
•
The VLT
®
HVAC Drive FC 102 Programming Guide
provides greater detail on working with
parameters and many application examples.
•
The VACON
®
100 BACnet Installation Manual
describes how to commission and parameterize
the BACnet protocol.
•
The VACON
®
100 HVAC Application Manual
provides greater detail on the parameters and
application examples.
Supplementary publications and manuals are available
from Danfoss. See drives.danfoss.com/knowledge-center/
technical-documentation/ for listings.
1.3
Product Overview
Use the BACnet MS/TP UBR-01 router to enable communi-
cation in a BACnet network. The router is the device
sending messages through the network. The messages can
be from master to slave or slave to master, and the router
can trigger alarms and/or warnings if the communication is
lost.
1.4 Symbols, Abbreviations, and
Conventions
Abbreviation Denition
BMS Building management system
EMC Electromagnetic compatibility
IP Internet protocol
PC Personal computer
TCP Transmission control protocol
Table 1.1 Symbols and Abbreviations
Conventions
•
Numbered lists indicate procedures.
•
Bullet lists indicate other information and
description of illustrations.
•
Italicized text indicates the following:
- Cross-reference.
- Link.
- Parameter name.
- Parameter option.
- Parameter group name.
•
All dimensions are in metric values (imperial
values in brackets).
•
An asterisk (*) indicates the default setting of a
parameter.
Introduction BACnet MS/TP Communication with MBS UBR-01 Router
2 Danfoss A/S © 05/2017 All rights reserved. MG92N102
11