Owner`s manual

Warning
Device Controls
Opening and Closing the Display
To open the display, press your left thumb on the lower-left corner of the
display and gently push in a clockwise direction. The display will spring
smoothly into the open position.
Normal operating position of the device is horizontal, with the wheel on the
right side, as shown above.
To close the display, reverse the motion to pivot the display counter-clockwise
and snap it into the closed position.
Do not open or close the display in the wrong direction or you risk damaging
your device. Stop if you feel any resistance; the display should spring smoothly
into position. Prevent display scratching by always using the carrying case to
transport your device. Use the wrist strap at all times to prevent accidental
dropping of the device.
6 Device Controls
I.