Manual

8 | DANGEROUS MUSIC
Operation: To align the unit, select a 1kHz digital sine wave and feed it at the desired level. Using a
flathead screwdriver, gently turn the front panel trim pots until they measure +4 dBu at the output.
Clockwise to increase output, counterclockwise to decrease it.
Tip: ,The DAC-ST comes aligned from the factory with a maximum output level of +22dBfs (-18
dBfs=+4 dBu). Don’t know what this all means? Contemplating audio suicide? 7. Bank LED
Input Indicators
Feature: Visual confirmation of which bus the module is occupying.
Benefit: Instantly determine which module is being controlled from the Monitor ST remote.
Operation: On the Monitor ST Remote, first use the “UP” and “DOWN” buttons to select the appropriate bank.
The Remote’s LEDs will verify which bank is active. Then choose the input by using the “Additional
Switching” 1-4 buttons. That’s how the Additional Switching remote buttons can control up to 4
devices. (More than just black magic). See the photo op above for visual alacrity.
[Half of the Monitor ST Remote pictured above]